|
Collectrol Model
Master-Slave Timer
|
 |
The Master-Slave
timer was designed to allow multiple slave boards to be controlled by a master
timing board. A system designed by Collectrol
Timers.
- Input & Output Supply 120V, 60Hz. - fuse type AGC1
- Logic circuits load 2VA @120VAC
- Max. Output Load 360VA @ 120VAC – depending upon timing duty cycle
- Operating Temperature: -40 to 80 C (-40 to 176 F)
- Alarm output relay contact 5A, 28VDC/120VAC
- Timer dimensions 6.8"w x 8.5"h x 1.4"d (173 x 216 x 36mm)
- Standard NEMA enclosure size 12"h x 10"w x 5"d (305mm x
254mm x 127mm)
- Specify enclosure size and type, if required
- Ten (10) output timer
- Isolated triac outputs
- Opto-Isolated input from Master Board
- Opto-Isolated output to another Slave Board
- Sequence complete, triac output
- Channel selected LED indication
- Channel bypass switching
- Transformer isolated logic
- Line transient suppression
- Maintenance free operation
- ON TIME (option A) settings of 01 to 99 in seconds
(option B) Settings of 01 to 99 multiplied by half
the AC line frequency
Examples: 12 x 8.333 = 100msecs. and 60 x 8.333 = 500msecs.
- OFF TIME 1 second to 99 minutes
- Input supply 120V, 60Hz. 1VA - fuse type AGC1
- 10milliamps transistor output to first Slave Board,
- Operating Temperature: -40 to 80 C (-40 to 176 F)
- Timer dimensions 6.875"w x 4.875"h x 1"d (175 x 124 x 25mm)
- Standard NEMA enclosure 8"h x 6"w x 3.5"d (203 x 152 x
89mm)
- Specify enclosure size and type, if required
- Digitally set ON and OFF timing periods
- Opto-Isolated open-collector transistor output
- Transformer isolated logic
- Line transient suppression
- CMOS integrated circuits
- Maintenance free operation
Back to Top