COLLECTROL CT35 Ten channel Timer

AC Input/Outputs to Bin Stimulators and Bag House Dust Collectors.

• Ten (10) output timer
• Digitally set ON and OFF timing periods
• Channel selected LED indication
• Channel bypass switching
• Triac outputs
• Transformer isolated logic
• Line transient suppression
• Provision for remote OFF time override
• Maintenance free operation

     
  Two thumbwheel switches for each of the timing circuits (ON & OFF) can be changed by either turning the wheel at the bottom of the switch, or by using a screwdriver in the slot in the center of the switch. Both switches can be rotated from 0-9 in single digit steps. This gives a range of 00 to 99 in seconds or minutes, as selected by the two position switch located to the left of the ON switches (S5) and to the right of the OFF switches (S6). The timing is LINE SYNCHRONIZED and no calibration or alinment is necessary. Each of the 10 bypass switches are set to either the ACTIVE (down) or BYPASS (press down upper edge of switch) as required.

• ON TIME 1 second to 99 minutes – optional milliseconds times on request
• OFF TIME 1 second to 99 minutes
• Input & Output Supply 120V, 60Hz. - fuse type AGC2
• Logic circuits load 2VA @ 120VAC
• Max. Output Load 360VA @ 120VAC – depending upon timing duty cycle
• Operating Temperature: -40 to 80 C (-40 to 176 F)
• Timer dimensions 7"w x 9"h x 1"d (178 x 229 x 25mm)
• Standard NEMA enclosure 10"h x 8"w x 4"d (254mm x 203mm x 102mm)
• Specify enclosure size and type, if required

Back to Top